All Products - Reformer tube,Cracking tube,Centrifugal casting radiant tube,Furnace roller,Cast Base Tray,Heat exchanger

Unit Price: USD 2000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 2000 / Piece/Pieces

Min. Order: 1 Piece/Pieces

standard: Aisi, Astm, Din, Gb

Fired Heater Steam Superheater Furnace/Fired Steam Superheaters Benefits of using a Fired Steam Superheater The efficiency of the process heating system is optimized. Condensation formation in the steam distribution system is reduced. The risk of water hammer or mechanical damage is alleviated. Pipework sizing is...

Contact Now

CCRU Flame Reformer Heater

Unit Price: USD 100000 / Set/Sets

Min.Order	Unit Price
1 Set/Sets	USD 100000 / Set/Sets

Min. Order: 1 Set/Sets

Model No.: TAIGOO 66007

standard: Aisi, Astm, Din

Fired heater for CCRU A fired heater is a direct-fired heat exchanger that uses the hot gases of combustion to raise the temperature of a feed flowing through coils of tubes aligned throughout the heater. Fired heater is comprised of - Tube - Headers, Manifolds, Piping - Tube Supports - Castable and lining - Burner...

Contact Now

Hazardous waste incinerator price

Model No.: TOPICN13015

Steam superheatng for furnace for 320KTA Ethylbenzene/styrene unit for SP Chemicals TOPICN13011 Fired Heater Waste Combustion Systems Our society's trash and waste continues to increase in complexity and quantity. Plastics and other synthetic materials that resist natural decomposition create a greater threat to the...

Contact Now

Waste heat boiler WHB for CCU

Model No.: TOPICN13019

standard: Aisi, Astm, Din, Gb

Fired Heater Hydrogen generation reformer 8000m3/h for SINOPEC Taizhou Company TOPICN13012 Steam reformer contains banks of catalyst filled tubes operating at temperatures around 850 to 1000oC to produce hydrogen or mixtures of hydrogen and carbon monoxide for use in further processes. Petrochemical Industry The tubes...

Contact Now

U tube for cracking tube

Model No.: TOPICN13028

U tube for cracking tube TOPICN13028 Manufacturing standards: 1. The design requirements of the customer and engineering company. 2. Centrifugal casting: HG/T 2601, ASTM A608, DIN 10295,JIS G5122, etc. 3. Forgings: To drawing and design 4. Standard for rolled pipe: To drawing and design Manufacturing process:...

Contact Now

Palm fitting for cracking tube

Model No.: TOPICN13030

Palm fitting for cracking tube TOPICN13030 Manufacturing standards: 1. The design requirements of the customer and engineering company. 2. Centrifugal casting: HG/T 2601, ASTM A608, DIN 10295,JIS G5122, etc. 3. Forgings: To drawing and design 4. Standard for rolled pipe: To drawing and design Manufacturing process:...

Contact Now

Centrifugal Casting Tube Coil

Model No.: TOPICN13036

standard: Aisi, Astm, Din, Gb

Tube Coil TOPICN13036 Manufacturing standards: 1. The design requirements of the customer and engineering company. 2. Centrifugal casting: HG/T 2601, ASTM A608, DIN 10295,JIS G5122, etc. 3. Static casting: HG/T 3673, ASTM A351, etc. 4. Forgings: To drawing and design 5. Standard for rolled pipe: To drawing and design...

Contact Now

Centrifugal casting catalyst tube

Model No.: TOPICN13022

standard: Aisi, Astm, Din, Gb

Centrifugal casting catalyst tube TOPICN13023 The centrifugal casting catalyst tube, characteristic of heat resistance and wear resistance, used on hydrocarbon steam reforming furnace is widely used in oil refinery, chemical plant and metallurgy industry such as DRI plant. The petrochemical industry has a big demand...

Contact Now

Insulation cap for reformer tube

Model No.: TOPICN13037

Whether alloy: Is Alloy

Item: Insulation cap for reformer tube TOPICN13040 Material： ZG40Cr25Ni35Nb,ZG40Cr35Ni45Nb,HP-Nb,HT50,GX40NiCrSiNb35-26,GX40NiCrNb45-35,G-NiCr28W,SCH24XNb Products： Hydrogen generation reformer tubes Ethylene Cracking tubes Centrifugal casting tube Cast tube sheets Cast Brackets and guides Cast Return bends & plug...

Contact Now

Tower Reactor for ethylene plant aromatics complex

Model No.: TOPICN13090

standard: Aisi, Astm, Din, Gb

Item: Pressure Reactor ethylene plant aromatics complex TOPICN13090 Type: Tower Reactor Material: Duplex 2205,254 SMO.304.316L Tolerance: as required ±0.02 Application: Energy & Mining, chemical Process: Beveling,Drilling holes,Laser cutting,Plasma cutting,Welding,Rolling,Bending,Plasma Auto welding,CNC machining...

Contact Now

Waste Heat Boiler for hydrogen reformer

Model No.: TOPICN13094

standard: Aisi, Astm, Din, Gb

Pressure Reactor Item: SINOCHEM GROUP 12,000 KTA Refinery Hydrogen Reformer Waste Heat Boiler (including 70m stack) TOPICN13094 Stainless Steel Pressure Vessel Applied in petrochemical industry

Contact Now

High quality W-type radiation tube

Unit Price: USD 1000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 1000 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO 66043

standard: Aisi, Astm, Din

W type radiant tube W Type Radiant Tube Application: mostly used in continuous annealing, vertical annealing furnace of galvanizing lines. In the nitrogen and hydrogen protection atmosphere, by burning of natural gas or coke oven gas inside the tube, heat the strip steel from room temperature to 750-950℃ quickly and...

Contact Now

galvanized line sink roll wholesale

Model No.: TOPICN13049

standard: Astm, Bs, Gb, Jis

Sink roll: used for galvanizing line zinc pot system. The galvanizing process will be carried out by continuous galvanizing through “three rollers & six arms”. The three rollers in the zinc pot are all passive rollers. The barrel is centrifugal casting, shaft is static casting. The main materials usually choose...

Contact Now

Centrifugal Casting Water Seal Roll

Unit Price: USD 1000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 1000 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66050

standard: Aisi, Astm, Din

Item: Centrifugal Casting Water Seal Roll Water seal rolls are usually applied for normalizing furnace and hardening furnace, under the hydrogen nitrogen protective environment, CGL (Continuous hot dip galvanizing line), Plating aluminizing line, Plating silicon line. Process:Centrifugal/spun casting for barrel,...

Contact Now

DRI for combined conversion furnace tube

Model No.: TOPICN13085

standard: Aisi, Astm, Din, Gb

Reformer tube for DRI TOPICN13085 Direct reduction iron is the low carbon porous substances formed by fine iron powder or iron oxide in the furnace through low temperature reduction. The content is stable and has fewer impurities which are used as raw materials of steel making for electric arc furnace; it could be the...

Contact Now

Tube bundle for air recuperator

Unit Price: USD 10000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 10000 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66087

standard: Aisi, Astm, Din

Item: Tube bundle Dri Reformer Tube -Air recuperator parallel flow hot -Air recuperator parallel flow cold -Natural gas heater tube bundle -Feed gas heater hot tube bundle -Feed gas heater cold tube bundle Casting Reformer Pipe Tube Applied in Metallurgical Industry

Contact Now

Rubber coated roll wholesale

Unit Price: USD 1000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 1000 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO 66108

Rubber coated roll Hardness(Shore): 30-90 Working temperature: -50℃~+250℃ Percentage elongation at rupture (%)<150 Feature: Heat resistance and cold resistance TAIGOO is a professional manufacturer for cast products include centrifugal casting tube , centrifugal casting tube bending , static casting pipe fittings ,...

Contact Now

Rubber Press Roll for Paper Making Industry

Unit Price: USD 1000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 1000 / Piece/Pieces

Supply Ability: 8000t per year

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66059

Rubber Press Roll for Paper Making Industry Item: Rubber Press Roll Taigoo is specialized in producing rubber press roll, made by centrifugal casting process, rubber press roll is applied in paper machinery, it is important to provide good elasticity and ease the pressing effect of the upper press roll on the wet...

Contact Now

High Efficiency Steel Rolling Mill Rolls

Model No.: TOPICN13060

High-efficiency rolling Work Roll TOPICN13060 steel mill casting application: Bar and wire rod mills, profile mills, etc. Machined Parts work volume Craft: Forging/Casting - Normalizing and Tempering - Finishing - Quenching and Tempering - Cryogenic Treatment - Finishing

Contact Now

Precision Sand Casting Auto Parts

standard: Aisi, Astm, Din, Gb, Jis

Sand casting TOPICN13089 Bracket: Applied to hang the radiant tube of heavy plate heat treatment furnace. Common material:ZG40Cr25Ni20 Elbow of radiant tube: elbows of W type or U type radiant tubes Material: ZG40Cr25Ni20Si2,ZG40Ni35Cr25Nb, ZG45Ni48Cr28W5Si. Sliding block: hot rolled slab stepping walking furnace,...

Contact Now

Oem Investment Casting/machining For Auto Parts

standard: Aisi, Astm, Din, Gb, Jis

Sand casting TOPICN13089 What Is Sand Casting? Sand casting, also known as sand molded casting, is a process that uses non-reusable sand molds to form metal castings. This is a common production method for a wide range of metal parts from a few ounces to a few tons. Sand casting is not only versatile in terms of its...

Contact Now

Heat resistant Cast Grate Bar

Unit Price: USD 100 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 100 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66067

standard: Aisi, Astm, Din

Item:Cast grate bar Application: Used in all types of furnaces Feature:Heat and corrosion resistance Material: ZG4Cr25Ni20Si2,ZG4Cr25Ni35NbW,2535W2,2848,ZG4Cr28Ni48W5Si2(2848W5),Co20 etc. Inspection: Chemical analysis by spectrometer for each heat, PT 100%(liquid penetrant test), VI(visual inspect)100%, dimensional...

Contact Now

Cast Grids Cast Intermediate Grates

Unit Price: USD 100 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 100 / Piece/Pieces

Supply Ability: 8000t per year

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO 66068

standard: Aisi, Astm

TAIGOO specializes in producing heat resistant casting, including furnace trays, cast heat treatment basket, heat treatment fixtures, cast pit furnace fixture, cast fixtures, cast furnace fans, cast link belts, roller rails, cast grid. Heat treatment castings can be produced ranging from 0.1Kg to 3500Kg. Item：Cast...

Contact Now

Cast sieve plate for sintering plant

Unit Price: USD 100 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 100 / Piece/Pieces

Supply Ability: 8000 t per year

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO 66070

standard: Aisi, Astm

Item: Cast sieve plate tray for sintering plant Application:Applied in sintering plant. Inspection: Chemical analysis by spectrometer for each heat, PT 100%(liquid penetrant test), VI(visual inspect)100%, dimensional check. Feature:Heat and corrosion resistance. Material:...

Contact Now