Page-7 All Products - Reformer tube,Cracking tube,Centrifugal casting radiant tube,Furnace roller,Cast Base Tray,Heat exchanger

Spun Cast Reformer Tube Hydrogen

Unit Price: USD 2000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 2000 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO108

Old and new: New

Video factory inspection: Provided

Mechanical test report: Provided

Taigoo is a leading manufacturer specializing in centrifugal casting tube and static castings in heat resistant alloys. Our products include reformer furnace tubes, ethylene cracking furnace tubes, furnace rollers and radiant tubes, heat/wear resistant castings and spare parts for steel industry. The products of...

Contact Now

Centrifugal Casting Bridle Rolls

Unit Price: USD 1000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 1000 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66051

standard: Aisi, Astm, Bs

Item: Centrifugal Casting Bridle rolls Application: The bridle roll is under solution heat treatment, usually applied in normalizing furnace and hardening furnace for CGL (Continuous hot dip galvanizing line), Plating aluminizing line, Plating silicon line, under the hydrogen nitrogen protective environment, working...

Contact Now

Continuous cast roll for plate heating furnace

Unit Price: USD 1000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 1000 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO 66055

standard: Aisi, Astm, Din

Item: Continuous cast roll Process: Centrifugal casting Specification: Outer diameter: 55mm-2000mm Material: 316,316L,HK,HT,HU,HP,HH,ZG40Cr25Ni20Si2,ZG14Ni32Cr20Nb,ZG45Ni48Cr28W5Si2 Application: The furnace roll are usually used for normalizing furnace and hardening furnace, under the hydrogen nitrogen protective...

Contact Now

Cast Reformer Tube for Direction Reduction Furnace

Unit Price: USD 10000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 10000 / Piece/Pieces

Supply Ability: 8000t per year

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66086

standard: Aisi, Astm

Reformer tube for DRI plant Direct reduction iron is the low carbon porous substances formed by fine iron powder or iron oxide in the furnace through direct reduction. The content is stable and has fewer impurities which are used as raw materials of steel making for electric arc furnace. At present, the advanced...

Contact Now

Centrifugal Casting Reformer Tube for DRI Plant

Unit Price: USD 10000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 10000 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66167

standard: Aisi, Astm, Din

DRI Reformer tube Material: Upper tube: DIN2.4879, lower tube: DIN1.4852 Process: Centrifugal casting Primary Reformer Tube The critical part of reducing reformer is reformer tube. Its working temperature is 900-1000 degrees. Normal diameter is 200-300 mm. The tubes are hung from the roof casing of the reformer with...

Contact Now

Wholesale price of roller sleeves

Unit Price: USD 100 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 100 / Piece/Pieces

Min. Order: 1 Piece/Pieces

standard: Aisi, Astm, Din, Gb

Item: Centrifugal Cast Bushings and Sleeves for sink roll and stabilizer roll TAIGOO is a professional manufacturer for Sleeves and bushes for sink rolls, Walking beams and riders, Skid rider castings, Rotary Retorts, Centrifugal Casting Sink Roll for Continue Galvanizing Line, Stabilizer rolls, Furnace rolls for...

Contact Now

Wholesale price of heat resistant air duct

Unit Price: USD 10 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 10 / Piece/Pieces

Min. Order: 1 Piece/Pieces

standard: Aisi, Astm, Din, Gb

Item: Rare Earth Heat Resistant Tuyere pipe Application： This new material- rare earth heat resistant steel can apply in nozzle of nozzle, precombustion chamber, door hole in heat-engine plant; also can apply in furnace door, tray, clip, hearth roll, heat treatment tray. Advantage： 1、Under same working condition, this...

Contact Now

Heat Resistant Cast Tray for Furnace Parts

Unit Price: USD 100 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 100 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66069

standard: Aisi, Astm, Din

Item: Heat resistant cast tray Feature:Heat and corrosion resistance Usage: Used in heat treatment industry Material: ZG4Cr25Ni20Si2,ZG4Cr25Ni35NbW,2535W2,2848,ZG4Cr28Ni48W5Si2(2848W5),Co20 etc. Inspection: Chemical analysis by spectrometer for each heat, PT 100%(liquid penetrant test), VI(visual inspect)100%,...

Contact Now

Roll sleeves and bushes

Unit Price: USD 100 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 100 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66188

standard: Aisi, Astm, Din

Item: Centrifugal Cast Bushings and Sleeves for sink roll and stabilizer roll TAIGOO is a professional manufacturer for Sleeves and bushes for sink rolls, Walking beams and riders, Skid rider castings, Rotary Retorts, Centrifugal Casting Sink Roll for Continue Galvanizing Line, Stabilizer rolls, Furnace rolls for...

Contact Now

Straightening rolls for bar and wire rod mills

Unit Price: USD 100 / Others

Min.Order	Unit Price
1 Others	USD 100 / Others

Min. Order: 1 Others

Model No.: TAIGOO66064

standard: Aisi, Astm, Din

Item: Straightening roll Straightening rolls are used in pipe, tube mills, section mills, bar and wire rolling mills. The straightening rolls are made by forged steel, featuring high hardness and good wear resistance, ensure good operating effect and long service life. Over years, we have supplied straightener rolls...

Contact Now

Roll arm for galvaning line

Unit Price: USD 100 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 100 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66186

standard: Aisi, Astm, Din

Item: Sink roll arm for galvanizing line Application：Hot dip galvanizing line Sink roll arm 1. Material:Anti-thermal material. 2. Specification: Customized (as per drawing provided ) 3. Details: Support arms, stabilizing roll, sink roll, bushes, sleeves, etc. 4. Qaulity Certificate: with relaible quality inspection....

Contact Now

Cast hearth roller for steel mill

Unit Price: USD 1000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 1000 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66054

standard: Aisi, Astm, Din

Item: Cast hearth roll Taigoo is specialized in producing Centrifugal Casting Furnace Roll for Continue Galvanizing Line, Centrifugal Casting Sink Rolls, Hearth roll, Guide roll Stabilizer rolls, Furnace rolls for plate heating furnace, Rolls for CAL, Water cooled rolls, Coated rolls, Water Sealed roll, Stabilized...

Contact Now

Straightening roll for tube mill

Unit Price: USD 100 / Others

Min.Order	Unit Price
1 Others	USD 100 / Others

Min. Order: 1 Others

Model No.: TAIGOO66190

standard: Aisi, Astm, Din

Item: Straightening roll Straightening rolls are used in pipe, tube mills, section mills, bar and wire rolling mills. The straightening rolls are made by forged steel, featuring high hardness and good wear resistance, ensure good operating effect and long service life. Over years, we have supplied straightener rolls...

Contact Now

Convection section for ethylene cracker

Unit Price: USD 10000 / Set/Sets

Min.Order	Unit Price
1 Set/Sets	USD 10000 / Set/Sets

Min. Order: 1 Set/Sets

Model No.: TAOGOO 66084

standard: Aisi, Astm, Din

Convection section Convection section is a heat exchanger that uses the hot gases of combustion to raise the temperature of a feed flowing through coils of tubes aligned throughout the heater. Convection section：The feed charge enters the coil inlet of convection section where it is preheated before transferring to...

Contact Now

Heat resistant cast charging baskets

Unit Price: USD 100 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 100 / Piece/Pieces

Supply Ability: 5000t/year

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66133

standard: Aisi, Astm

Item: Cast stackable baskets made by investment casting and sand casting with heat resistant nickel chrome alloy TAIGOO specializes in producing all kinds of heat treatment fixtures used for heating processing equipment, like tray, basket, fan and so on, widely used for heat treatment equipment, including...

Contact Now

Stainless Steel Heat Resistant Cast Base Tray

Unit Price: USD 100 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 100 / Piece/Pieces

Packaging: Wooden case

Supply Ability: 2000t per year

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO660136

standard: Aisi

Item: Heat resistant steel cast base tray for heat treatment furnace TAIGOO is a heat resistant casting manufacturer from China, specializes in producing all kinds of heat treatment fixtures used for heating processing equipment，including cast furnace trays, cast heat treatment basket, cast pit furnace fixture, cast...

Contact Now

Sink roll for galvanizing line

Unit Price: USD 100 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 100 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66187

standard: Aisi, Astm, Din

Item: Sink roll for galvanizing line for zinc pot Process: Centrifugal casting for roll barrel, precision casting for roll shaft. Specification: OD 55mm-2000mm Application: used for galvanizing line zinc pot line Sink roll is applied for galvanizing line zinc pot system, continuously galvanizing is realized by the...

Contact Now

Piercing head for produing seamless pipe

Unit Price: USD 100 / Others

Min.Order	Unit Price
1 Others	USD 100 / Others

Min. Order: 1 Others

standard: Aisi, Astm, Din, Jis

Piercing plug Piercing plug is the main tool for hot rolloing seamless tube with large consumption. Its working conditions of piercing plug is severe, not only bears the strong friction and extrusion, but also bears the heat shock and cooling repeatedly. 35CrMo Chemical composition (1.7220)

Contact Now

Heat resistant reformer tube sale

Model No.: TOPICN13038

standard: Aisi, Astm, Din, Gb

Heat resistant reformer tube TOPICN13038 The reformer tube used on hydrocarbon steam reforming furnace is widely used in oil refinery, chemical plant and metallurgy industry such as DRI plant. The petrochemical industry has a big demand for hydrogen. Over 90% of global refineries and chemical plants produce hydrogen...

Contact Now

Centrifugal Casting Cracking Tubes

Model No.: TOPICN13014

standard: Aisi, Astm, Din, Gb

Ethylene cracking tube TOPICN13014 Manufacturing standards: 1. The design requirements of the customer and engineering company. 2. Centrifugal casting: HG/T 2601, ASTM A608, DIN 10295,JIS G5122, etc. 3. Static casting: HG/T 3673, ASTM A351, etc. 4. Forgings: To drawing and design 5. Standard for rolled pipe: To...

Contact Now

Ethylene Cracking Furnace Centrifugal Casting Tube

Unit Price: USD 1000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 1000 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Item: Tubular cracking furnace is the main way to produce ethylene in China. Ethylene cracking furnace mainly includes: heating system, heat recovery system, reaction system. The furnace includes: burner, radiant section, convection section and quench system, and high pressure steam system. The cracking furnace tube...

Contact Now

Hi-CrNi Centrifugal casting cracking tube

Unit Price: USD 1000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 1000 / Piece/Pieces

Supply Ability: 5000t/year

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66119

standard: Aisi, Astm

Item: Centrifugal casting cracking tube Tubular cracking furnace is the main way to produce ethylene in China. Ethylene cracking furnace mainly includes: heating system, heat recovery system, reaction system. The furnace includes: burner, radiant section, convection section and quench system, and high pressure steam...

Contact Now

Cast skid rider Co40 Co50 by investment casting

Unit Price: USD 1000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 1000 / Piece/Pieces

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO 663076

standard: Aisi, Astm

Item: Cast skid rider Application: Used in slab reheat furnace and walking beam furnace Material:Co20, Co40, Co50, ZG40Cr25Ni35Nb,ZG40Cr35Ni45Nb,HP-Nb,HT50,GX40NiCrSiNb35-26,GX40NiCrNb45-35,G-NiCr28W,SCH24XNb Products: Skid rider Cast tray Base tray for heat treatment Batch skid trays Cast furnace tray Grids baskets...

Contact Now

Hydrogen generation reformer tube

Unit Price: USD 2000 / Piece/Pieces

Min.Order	Unit Price
1 Piece/Pieces	USD 2000 / Piece/Pieces

Brand: TAIGOO

Supply Ability: 5000t/year

Min. Order: 1 Piece/Pieces

Model No.: TAIGOO66120

standard: Aisi

Item: Hydrogen generation reformer tube Reformer furnace includes: inlet manifold, reformer tubes, outlet manifold and up/down pigtail tubes. Manufacturing standards: 1. The design requirements of the customer and engineering company. 2. Centrifugal casting: HG/T 2601, ASTM A608, DIN 10295,JIS G5122, etc. 3. Static...

Contact Now